FREE UPDATES THE CISCO 300-420 EXAM FOR 365 DAYS TO KEEP YOU AHEAD

Free Updates the Cisco 300-420 Exam for 365 Days to Keep You Ahead

Free Updates the Cisco 300-420 Exam for 365 Days to Keep You Ahead

Blog Article

Tags: 300-420 Latest Exam Papers, Exam 300-420 Guide, Knowledge 300-420 Points, 300-420 Exam Preparation, 300-420 Latest Test Answers

BONUS!!! Download part of Exam4Labs 300-420 dumps for free: https://drive.google.com/open?id=1xA5Fp1jiuWRjbh0_1PeXYnnVum5S-lxr

Exam4Labs Cisco 300-420 Exam Study Guide can be a lighthouse in your career. Because it contains all 300-420 exam information. Select Exam4Labs, it can help you to pass the exam. This is absolutely a wise decision. Exam4Labs is your helper, you can get double the result, only need to pay half the effort.

To prepare for the Cisco 300-420 exam, candidates are expected to have a strong understanding of the Cisco IOS software, network design principles, and network protocols. They should also possess knowledge of the latest trends and technologies in the networking industry. It is recommended that candidates have at least five years of experience working with Cisco technologies.

Cisco 300-420 exam covers a wide range of topics, including advanced addressing and routing solutions, network security, virtualization, automation, and network architecture. Candidates are required to demonstrate their understanding of the latest industry trends and best practices in designing enterprise networks. 300-420 Exam consists of multiple-choice questions, and candidates have 90 minutes to complete it. Passing the Cisco 300-420 exam requires a score of at least 750 out of 1000.

>> 300-420 Latest Exam Papers <<

Cisco 300-420 Exam Questions Are Out: Download And Prepare [2025]

300-420 Exam is just a piece of cake if you have prepared for the exam with the helpful of Exam4Labs's exceptional study material. If you are a novice, begin from 300-420 study guide and revise your learning with the help of testing engine. 300-420 Exam brain dumps are another superb offer of Exam4Labs that is particularly helpful for those who want to the point and the most relevant content to Pass 300-420 Exam. With all these products, your success is assured with 100% money back guarantee.

Read the topics of the Cisco 300-420 Exam

Candidates must know the topics before they start of preparation. Because it will really help them in hitting the core. Our Cisco 300-420 exam dumps will include the following topics:

  • Network Services 20%
  • Advanced Addressing and Routing Solutions 25%
  • Advanced Enterprise Campus Networks 25%
  • WAN for Enterprise Networks 20%
  • Automation 10%

Cisco Designing Cisco Enterprise Networks Sample Questions (Q312-Q317):

NEW QUESTION # 312
Which design element should an engineer consider when multicast is included in a Cisco SD- Access architecture?

  • A. Rendezvous points must be used in a PIM SSM deployment.
  • B. Multicast traffic is transported in the overlay and the EID space for wired and wireless clients.
  • C. Multicast clients reside in the underlay, and the multicast source is outside the fabric or in the overlay.
  • D. PIM SSM must run in the underlay.

Answer: B

Explanation:
Multicast traffic is transported in the overlay, in the EID space, for both wired and wireless clients.
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKEWN-2020.pdf


NEW QUESTION # 313
A network engineer must segregate three interconnected campus networks using IS-IS routing. A two-layer hierarchy must be used to support large routing domains and to avoid more specific routes from each campus network being advertised to other campus network routers automatically. Which two actions does the engineer take to accomplish this segregation? (Choose two.)

  • A. Assign the same IS-IS NET value for each campus, and configure internal campus routers with Level 1/ Level 2 routing.
  • B. Utilize different MTU values for each campus network segment. Level 2 backbone routers must utilize a larger MTU size of 9216.
  • C. Designate two IS-IS routers as BDR routers at the edge of each campus, and configure one BDR for all Level 1 routers and one BDR for all Level 2 routers.
  • D. Assign a unique IS-IS NET value for each campus, and configure internal campus routers with Level 1 routing.
  • E. Designate two IS-IS routers from each campus to act as Level 1/Level 2 backbone routers at the edge of each campus network.

Answer: D,E


NEW QUESTION # 314
An existing network solution is using BFD in echo mode. Several of the network devices are experiencing high CPU utilization which an engineer has determined is related to the BFD feature. Which solution should the engineer leverage to reduce the CPU load?

  • A. Enable BFD multi-hop on the devices with low CPU resources.
  • B. Implement BED asynchronous mode between peers with low CPU resources.
  • C. Implement slow timers between peers with low CPU resources.
  • D. Utilize copyright delay on all routers in the network.

Answer: C


NEW QUESTION # 315
A company wants to switch from static routing to a dynamic routing protocol to ease the administrative and operational overhead. The network topology is hub and spoke, and the branches use DMVPN back to the hub using two 100 Mbps internet connections. Both links must be used due to spikes in traffic, and routing must take traffic utilization of the links into account.
Also, the branch routers have limited memory and CPU resources.
Which routing protocol and design solution must the company choose?

  • A. OSPF deployed in area 0 with branch routers connecting from area 1
  • B. ISIS with the hub and spoke routers configured in two different areas
  • C. EIGRP with branch routers as stub routers using ECMP
  • D. iBGP with the hub routers set up as route reflectors and branches set up as clients

Answer: C


NEW QUESTION # 316

Refer to the exhibit. An architect must design an OSPF solution for an enterprise customer. The design must meet these requirements:
Limit the link flap impact to Area-1 and Area-2.
Any link failure must have minimal impact on voice and video traffic.
Which two OSPF solutions must the architect include in the design? (Choose two.)

  • A. Reduce the frequency of OR and BOR elections.
  • B. Tune LSA and SPF throttling timers
  • C. Advertise default routes from the backbone to nonbackone areas.
  • D. increase hello and how timer.
  • E. Enable manual route summarization and configure all nonbackbone areas as stub networks.

Answer: B,E


NEW QUESTION # 317
......

Exam 300-420 Guide: https://www.exam4labs.com/300-420-practice-torrent.html

P.S. Free & New 300-420 dumps are available on Google Drive shared by Exam4Labs: https://drive.google.com/open?id=1xA5Fp1jiuWRjbh0_1PeXYnnVum5S-lxr

Report this page